Uniview IPC675LFW-AX4DUPKC-VG 5MP Outdoor Mini PTZ Active Deterrence Network Camera with Night Vision - Manual (Page 127)

122
Configure the parameters.
Item Description
Server IP IP address of the FTP server.
Port No. Use the default port.
Username Username used to log in to the FTP server.
Password Password used to log in to the FTP server.
Test Click to test the connection to the FTP server.
Upload Images
Select the check box if you want to upload smart snapshots.
Overwrite Storage: When the number of images in the folder of the lowest level reaches
the threshold, the server will continue to save new images by overwriting the existing
images. For example, if the folder path is \IP\date , the folder of the lowest level is the
level-2 folder date . When the images uploaded on Jan. 4, 2022 exceeds 1000, existing
images in the 20220104 folder will be overwritten by new images.
NOTE!
If you select Overwrite Storage , make sure the last naming element of filename is Photo
No..
For
Overwrite storage threshold , the default is 1000 images, and the maximum is
100,000 images.
Custom Naming Rules Choose Enable and then set the naming rule (see step 5).
Convert Path into
UTF8 Format
Select if you want to convert the path into UTF8 format.
Configure the storage path.
Item Description
File Path
Up to 6 levels. If not specified, the default path “\IP\Date\Intelligent” will be used. Intelligent
means smart snapshots.
Filename
Naming element: Up to 20 fields are allowed. If not specified, the sequence number such
as 1, 2, 3, … will be used as the filename.
Click Save .

GA/T1400
Go to Setup > System > Server > Intelligent Server .
Set Platform Communication Type to Video&Image Database .
Configure the parameters.