Hitachi SJ200 Series - Manual (Page 253)

SJ200 Inverter
Appendix B
B–39
Note 1: Assume that the inverter current rating is 10000 (for C041).
The following table lists the holding registers for the “H” Group Motor Constants.
C146 Terminal [12] ON delay R/W Range is 0.0 to 100.0 sec. 00F4h 0 to 1000 0.1 sec
C147 Terminal [12] OFF
delay R/W Range is 0.0 to 100.0 sec. 00F5h 0 to 1000 0.1 sec
C148 Output relay ON delay R/W Range is 0.0 to 100.0 sec. 00F6h 0 to 1000 0.1 sec
C149 Output relay OFF delay R/W Range is 0.0 to 100.0 sec. 00F7h 0 to 1000 0.1 sec
“C” Group Intelligent Terminal Functions
Func.
Code
Name R/W Description
Network Data
Reg. Range Res.
“H” Group Motor Constants
Func.
Code
Name R/W Description
Network Data
Reg. Range Res.
H003 Motor capacity R/W Thirteen selections:
0..... 0.20 kW
1..... 0.37 kW
2..... 0.40 kW
3..... 0.55 kW
4..... 0.75 kW
5..... 1.10 kW
6..... 1.50 kW
7..... 2.2 kW
8..... 3.0 kW
9..... 3.7 kW
10... 4.0 kW
11... 5.5 kW
12... 7.5 kW
00D9h 0 to 12 —
H203 Motor capacity, 2nd
setting R/W 00DAh 0 to 12 —
H004 Motor poles setting R/W Four selections:
2 / 4 / 6 / 8
00DBh 2, 4, 6,
8
1 pole
H204 Motor poles setting, 2nd
motor R/W 00DCh 2, 4, 6,
8
1 pole
H006 Motor stabilization
constant R/W Motor constant (factory set),
range is 0 to 255
00DDh 0 to 255 1
H206 Motor stabilization
constant, 2nd motor R/W 00DEh 0 to 255 1
H007 Motor voltage select R/W Two selections, option codes:
00... 200V
01... 400V
00DFh 0, 1 —
H207 Motor voltage select,
2nd motor R/W 00E0h 0, 1 —