Hitachi SJ200 Series - Manual (Page 256)

SJ200 Inverter
Appendix C
C–3
Standard Functions
“A” Group Parameters Default Setting
User
Setting Func.
Code
Name
-FEF
(EU)
-FU
(USA)
A001 Frequency source setting 01 00
A002 Run command source setting 01 02
A003 Base frequency setting 50.0 60.0
A203 Base frequency setting, 2nd
motor 50.0 60.0
A004 Maximum frequency setting 50.0 60.0
A204 Maximum frequency setting, 2nd
motor 50.0 60.0
A005 [AT] selection 00 00
A011 Pot./ O–L input active range start
frequency
0.0 0.0
A012 Pot./ O–L input active range end
frequency
0.0 0.0
A013 Pot./ O–L input active range start
voltage
0.0 0.0
A014 Pot./ O–L input active range end
voltage
100. 100.
A015 Pot./ O–L input start frequency
enable
01 01
A016 External frequency filter time
constant 2. 8.
A020 Multi-speed 0 setting 0.0 0.0
A220 Multi-speed 0 setting, 2nd motor 0.0 0.0
A021 Multi-speed 1 setting 0.0 0.0
A022 Multi-speed 2 setting 0.0 0.0
A023 Multi-speed 3 setting 0.0 0.0
A024 Multi-speed 4 setting 0.0 0.0
A025 Multi-speed 5 setting 0.0 0.0
A026 Multi-speed 6 setting 0.0 0.0
A027 Multi-speed 7 setting 0.0 0.0
A028 Multi-speed 8 setting 0.0 0.0
A029 Multi-speed 9 setting 0.0 0.0
A030 Multi-speed 10 setting 0.0 0.0