Roland Fantom-X7 - Manual (Page 100)

100
Playing in Performance Mode
You can bring together your favorite and most frequently used
performances in one place by registering them in the Favorite
Performance. By using this function you can quickly select your
favorite performances.
For instructions on how to register to the Favorite Performance,
refer to
“Registering a Favorite Performance” (p. 100).
1. Press [LAYER/SPLIT] or [MIXER].
2. Press [F5 (Perf List)] and then press [F3 (Favorite)].
The Favorite List screen appears.
fig.08-005_50
3. Press or to select a performance number.
To switch banks, press [F1 ( ⇑ )] [F2 ( ⇓ )].
4. Press [F8 (Select)] to select the patch.
You can bring together your favorite and most frequently used
Performances in one place by registering them in the Favorite
Performance. By using this function you can rapidly select favorite
Performances from Preset/User/Card area or a Wave Expansion
Board. You can register a total of 64 Performances (8 sounds x 8
banks) as favorite Performance.
For details on selecting a favorite performance, refer to
“Selecting Favorite Performances” (p. 100).
1. Select the Performance that you wish to register (p. 99).
2. Press [F5 (Perf List)].
3. Press [F3 (Favorite)].
The Favorite List screen appears.
fig.08-006_50
4. Press [F1 ( ⇑ )] [F2 ( ⇓ )] to select the bank in which you wish
to register the Performance.
5. Press or to select the number to which you wish to
register. The number you select here corresponds to [F1]–
[F8].
6. Press [F6 (Regist)] to execute the registration.
* To cancel, press [EXIT].
By pressing [F5 (Remove)] you can cancel the Performance
registration that is selected in the Favorite List screen.
The currently selected part is called the “current part.”
1. From the Layer screen, Use or to select the part.
The selected part is indicated by “ .”
fig.08-007_50
Selecting Favorite
Performances
Registering a Favorite
Performance
Using the Layer Screen
Selecting a Part
Fantom-X678_r_e.book 100 ページ ２００５年５月１２日 木曜日 午後４時４０分