Adjusting the display contrast (lcd contrast), Turning off the power, Cord from the outlet (p. 22) – Roland Fantom-X7 User Manual
Page 22: Adjusts the display contrast. -> (p. 22)
22
Getting Ready
The characters in the display may be difficult to view immediately after turning on the Fantom-
X’s power or after extended use. Your viewing angle or the current lighting conditions can also
affect the appearance of the display. In such situations, you can turn the CONTRAST knob
(located on the rear panel) to adjust the contrast of the display.
fig.02-005
1.
Before you turn off the power, consider these two questions:
• Have the volume controls for the Fantom-X and all connected audio devices been
turned to their lowest settings?
• Have you saved your Fantom-X sounds or other data you’ve created?
2.
Turn off the power for all connected audio devices.
3.
Turn off the POWER ON switch of the Fantom-X.
Adjusting the Display Contrast (LCD Contrast)
Turning Off the Power
If you need to turn off the
power completely, first turn
off the POWER switch, then
unplug the power cord from
the power outlet. Refer to
“Power Supply”
Fantom-X678_r_e.book 22 ページ ２００５年５月１２日 木曜日 午後４時４０分