Roland Fantom-X7 - Manual (Page 222)

222
Connecting to Your Computer via USB (USB Mode)
Driver Installation and Settings
In order to use the Fantom-X as a USB MIDI device from your
computer, you must first install the USB MIDI driver. The USB MIDI
driver is on the included “Fantom-X Driver CD-ROM.”
In order to use USB in MIDI mode, you must install the driver from
the included CD-ROM into your computer.
The correct driver and the installation procedure will depend on
your system and on the other programs you are using. Be sure to
read the Readme file on the CD-ROM before installation.
Windows XP/2000
\Win2kXP\Readme_e.htm
Windows Me/98/98SE
\Win98Me\Readme_e.htm
Mac OS 9 (9.04 or later)
\Fantom-X Driver OS9 (E)\Readme_e.htm
Mac OS X
\Fantom-X Driver OSX (E)\Readme_e.htm
Exchanging MIDI Messages
with Your Computer
(MIDI Mode)
Caution when
disconnecting the USB cable
You must shut down your computer before disconnecting
the USB cable. Disconnecting the cable while your
computer’s power is on may destabilize its operation.
What is the USB MIDI Driver?
The USB MIDI Driver is a software which passes data between
the Fantom-X and the application (sequencer software, etc.) that
is running on the USB-connected computer.
The USB MIDI Driver sends data from the application to the
Fantom-X, and passes data from the Fantom-X to the
application.
fig.23-001_50
Application
USB
Driver
Computer
USB connector
USB cable
USB connector
Fantom-X
Fantom-X678_r_e.book 222 ページ ２００５年５月１２日 木曜日 午後４時４０分