Roland Fantom-X7 - Manual (Page 136)

136
Playing Rhythms
4. When you have made the setting, press [F8 (Close)].
1. Hold down [SHIFT] and press [RHYTHM].
2. Press [F1 (Rhythm Group)].
A screen like the one below appears.
If Performance mode is selected, (Performance) will appear at
the right of “Rhythm Group.”
fig.13-002_50
* When you select the Rhythm group, the most suitable rhythm set is
assigned to the Pad part. (In the screen, this is indicated by
“Recommended Rhy (Recommended Rhythm set).”)
3. Turn the VALUE dial or press [INC] or [DEC] to make the
setting.
This selects the Rhythm group’s basic performance Style.
Value: P01–32 (Preset), U01–32 (User)
4. When you have made the setting, press [EXIT].
1. Hold down [SHIFT] and press [RHYTHM].
2. Press [F2 (Rhythm)].
A screen like the one below appears.
If Performance mode is selected, (PERFORMANCE) will appear
at the right of “Rhythm Pattern.”
fig.13-003_50
3. Press or to move the cursor to each parameter,
and either turn the VALUE dial or press [INC] or [DEC] to
make the setting.
You can audition the rhythm pattern by pressing [F6 (Preview)]
so it lights in red. When you’ve finished auditioning the
pattern, press [F6 (Preview)] once again to stop.
4. When you have made the setting, press [EXIT].
Select the basic playing style of the rhythm.
This selects the rhythm’s basic performance Style.
Value: P001–256 (Preset), U001–256 (User)
Select the Rhythm Group
Using a controller to adjust the playback tempo
Since tempo control is assigned to one of the Fantom-X’s
realtime control knobs, it’s easy to adjust the tempo at which the
rhythm pattern will play back.
fig.11-003
1. Press the REALTIME CONTROL button so the ARP/
RHY indicator lights.
2. Play an Rhythm Pattern, and turn the realtime control
knob.
Tempo
Rhythm Pattern Settings
Selecting Rhythm Patterns
Fantom-X678_r_e.book 136 ページ ２００５年５月１２日 木曜日 午後４時４０分