Roland Fantom-X7 - Manual (Page 25)

25
Various Performance Features
Control Pedal
If an optional expression pedal or pedal switch (EV-5, DP-2.) is connected to the rear panel
PEDAL CONTROL jack, you can use the pedal to control the volume or various function.
fig.02-011
Transpose (Trans)
You can transpose the pitch of the keyboard in semitone steps, over a range of G–F# (-5– +6
semitones) by adjusting the Transpose parameter’s value.
Press [CURSOR] to move the cursor to “Trans” in the upper part of the screen, and turn the
VALUE dial or press [INC] or [DEC] to change its setting.
fig.02-012
Roland
Use only the specified
expression pedal or pedal
switch (EV-5, DP-2; sold
separately). By connecting any
other expression pedals, you
risk causing malfunction and/
or damage to the unit.
The way in which the sound
changes will depend on the
settings. For details on settings
for parameters controlled by
the pedal, refer to “Making
Control Pedal Settings”
(“Making Control Pedal
Settings”
(p. 126)).
For details, refer to
“Transposing the Keyboard in
Octave Units (Octave Shift)”
(“Transposing the Keyboard
in Octave Units (Octave
Shift)” (p. 45)).
Fantom-X678_r_e.book 25 ページ ２００５年５月１２日 木曜日 午後４時４０分