Roland Fantom-X7 - Manual (Page 42)

42
Playing in Patch Mode
The Fantom-X allows you to preview patches by hearing a phrase
appropriate for each type of patch.
1. Press [PATCH/RHYTHM] to access the Patch Play screen.
2. Press [F1 (Patch List)] to access the Patch List screen.
fig.05-009_50
3. Press and hold [F7 (Preview)].
The patch selected in the Patch List screen will be sounded.
4. Release your finger from [F7 (Preview)], and the phrase will
stop playing.
If you wish to change how the phrase is played by Phrase
Preview, you can edit the Preview Mode parameter (p. 232).
You can create a list of frequently used sounds, and recall them
instantly. Since you can register Patches, Rhythm Sets, or
Performances, any type of sound you need can be recalled instantly
regardless of the mode.
Each list (bank) can store a total of sixteen patches, rhythm sets, and
performances. You can create twenty of these banks.
For example, you might use bank 1 to list up to sixteen sounds that
you use in the first song of your live set.
1. Press [MENU] to open the Menu window.
2. Either turn the VALUE dial or press or to select
“Live Setting Play,” and then press [ENTER].
The Live Setting Play screen appears.
fig.05-001b_50
You can also hold down [SHIFT] and press [PIANO MODE] to
access the Live Setting Play screen.
3. Press or to select the bank that you want to recall.
4. Press [F1 (1)]–[F8 (8)] to select the step number that you
want to recall.
To select 9–16, hold down [SHIFT] and press [F1 (9)]–[F8 (16)].
The selected sound will be recalled.
Alternatively, in step 4 of this procedure, you can use [INC]/
[DEC] to step through the sounds by moving to the next (or
previous) step number.
In step 4 of this procedure, you can also use or to select
the step number. In this case, the sound will not change until
you press [ENTER].
Auditioning Patches
(Phrase Preview)
Creating a list of frequently
used Patches and
Performances (Live Setting)
Recalling sounds
Fantom-X678_r_e.book 42 ページ ２００５年５月１２日 木曜日 午後４時４０分