Roland Fantom-X7 - Manual (Page 129)

129
Playing Arpeggios
1. Connect an optional pedal switch (DP series etc.) to the
HOLD PEDAL jack.
2. Press [ARPEGGIO] to turn on the arpeggio.
3. Play a chord while pressing the hold pedal.
4. If you play a different chord or notes while the arpeggio is
being held, the arpeggio will change accordingly.
When using arpeggios while the sequencer is playing, or when you
want to record arpeggios into the sequencer in real time, you can
synchronize the arpeggio with the start/stop timing of the
sequencer.
For details, refer to “Arpeggio/Rhythm Sync Switch” (p. 227).
1. Hold down [SHIFT] and press [ARPEGGIO].
A screen like the one below appears.
If Performance mode is selected, (Performance) will appear at
the right of “Arpeggio.”
fig.11-004_50
2. Press [CURSOR] to move the cursor to each parameter, and
either turn the VALUE dial or press [INC] or [DEC] to make
the setting.
3. When you have made the setting, press [EXIT].
This selects the arpeggio’s basic performance Style. The arpeggio
styles are kept in preset memory and user memory.
Value: U001–128 (User), P001–128 (Preset)
This sets the particular note division and resolution in a “single
grid” used in creating the arpeggio in an Arpeggio Style, and how
much of a “shuffle” syncopation is to be to applied (none/weak/
strong) to it (grid type).
* Grid settings are shared with the rhythm pattern.
Value:
1/4: Quarter note (one grid section = one beat)
1/8: Eighth note (two grid sections = one beat)
1/8L: Eighth note shuffle Light (two grid sections = one beat,
with a light shuffle)
1/8H: Eighth note shuffle Heavy (two grid sections = one beat,
with a heavy shuffle)
1/12: Eighth note triplet (three grid sections = one beat)
1/16: Sixteenth note (four grid sections = one beat)
1/16L: Sixteenth note shuffle Light (four grid sections = one
beat, with a light shuffle)
1/16H: Sixteenth note shuffle Heavy (four grid sections = one
beat, with a heavy shuffle)
1/24: Sixteenth note triplet (six grid sections = one beat)
Playing Arpeggios Along
with the Sequencer
Arpeggio Settings
Selecting Styles for Arpeggio
Performances (Arpeggio Style)
Changing the Beat and Shuffle
(Arp/Rhythm Grid)
About Arpeggio Styles
An Arpeggio Style is a series of data for basic arpeggio patterns
and chord styles recorded in the form of a grid consisting of a
maximum of 32 steps x 16 pitches.
fig.11-005
Each grid contains one of the following kinds of data.
• ON: Note On (with Velocity data)
• TIE: Tie (hold of the previous note)
• REST: Rest (no sound played)
The keys that are pressed along with the sequence in which they
are pressed is referenced to the “lowest-pitched key during
input.” Thus, you can use a single Arpeggio Style in different
Patches and Performances at the same time.
A Arpeggio Style is not part of any patch or Performance, but
rather independent data; you can store up to 64 Arpeggio
Styles.
STEP
HIGH
1 2 3 4 5 .... 32 6 7 8
Note 01
Note 03
Note 02
Note 04
Note 16
9 10 11
Note 05
Note 06
Fantom-X678_r_e.book 129 ページ ２００５年５月１２日 木曜日 午後４時４０分