Roland Fantom-X7 - Manual (Page 97)

97
Playing in Performance Mode
A performance contains settings that apply to each individual part,
such as the patch (rhythm set) assigned to each part, and its volume
and pan.
Broadly speaking, Performance mode consists of two screens: Layer
screen and Mixer screen.
Use the Layer screen when you want to combine multiple sounds
(patches or rhythm sets) to create complex sounds. This lets you play
patches together (“layer”) or play different patches in separate areas
of the keyboard (“split”).
Use the Mixer screen when you want to mix the sounds by adjusting
the level and pan for each of 16 parts.
When you play the keyboard, you will hear the current part and the
parts whose keyboard switch has a check mark.
In addition to the settings of each part, the following settings can
also be stored for each performance.
• Controller settings such as the D Beam, realtime control knobs,
assignable switches, and pads
• Arpeggio and chord memory settings
• Rhythm group number
To access the Performance Layer screen, use the following
procedure.
1. Press PERFORMANCE [LAYER/SPLIT].
You will enter Performance mode, and the Layer screen
appears.
fig.04-015_50
To access the Performance Mixer screen, use the following
procedure.
1. Press PERFORMANCE [MIXER].
You will enter Performance mode, and the Mixer screen
appears.
fig.04-016_50
2. Press [F6] to switch the page.
fig.08-001_50
Displaying Performance
Layer Screen
Displaying Performance
Mixer Screen
Fantom-X678_r_e.book 97 ページ ２００５年５月１２日 木曜日 午後４時４０分