Roland Fantom-X7 - Manual (Page 266)

266
Parameter List
Pedal/D Beam Group (P.226)
Keyboard Group (P.226)
Sync/Tempo Group (P.227)
Metronome Group (P.228)
Sound (P.229)
System Parameters
Parameter Value
D Beam Sens D Beam Sensitivity 0–127
Control Pedal Assign CC01–31, 33–95, BEND-UP, BEND-DOWN, AFTER-
TOUCH, OCT UP, OCT DOWN, START/STOP,
PUNCH IN/OUT, TAP TEMPO, PROG UP, PROG
DOWN, FAVORITE UP, FAVORITE DOWN, ARP /
RHY SW, RHY START/STOP, CHORD SW, LIVE SET
UP, LIVE SET DOWN, LOOP
Control Pedal Polarity STANDARD, REVERSE
Hold Pedal Polarity STANDARD, REVERSE
Continuous Hold Pedal OFF, ON
Parameter Value
Keyboard Velocity REAL, 1–127
Keyboard Sens Keyboard Sensitivity LIGHT, MEDIUM, HEAVY
Aftertouch Sens Aftertouch Sensitivity 0–100
Parameter Value
Sync Mode MASTER, SLAVE-MIDI, SLAVE-MTC, REMOTE
Sync Output Sync Output switch OFF, ON
Tempo Override OFF, ON
Arp/Rhythm Sync Switch Arpeggio/Rhythm Sync Switch OFF, ON
MMC Mode MASTER, SLAVE
MMC Output MMC Output switch OFF, ON
MTC Sync Output MTC Sync Output switch OFF, ON
MTC Frame Rate 24, 25, 29N, 29D, 30
MTC Offset Time Hour 0–23 hours
MTC Offset Time Minute 0–59 minutes
MTC Offset Time Second 0–59 seconds
MTC Offset Time Frame 0–29 frames
MTC Error Level 0 –10
Parameter Value
Metronome Mode OFF, PLAY-ONLY, REC-ONLY, PLAY&REC, AL-
WAYS
Metronome Level 0–10
Metronome Sound TYPE 1, TYPE 2, TYPE 3, TYPE 4
Beat Indicator Mode REC&PLAY, ALWAYS
Parameter Value
Local Switch OFF, ON
Master Tune 415.3–466.2 Hz
Master Level 0–127
Output Gain -12– +12 dB
Mix/Parallel MIX, PARALLEL
Master Key Shift -24– +24
Patch Remain Patch Remain Switch OFF, ON
Fantom-X678_r_e.book 266 ページ ２００５年５月１２日 木曜日 午後４時４０分