Roland Fantom-X7 - Manual (Page 45)

45
Playing in Patch Mode
You can bring together your favorite and most frequently used
rhythm sets in one place by registering them in the favorite patch. By
using this function you can rapidly select favorite rhythm sets from
Preset/User/Card area or a Wave Expansion Board. You can
register a total of 64 sounds (8 sounds x 8 banks) as favorite patchs.
For details on selecting a favorite patch, refer to “Selecting
Favorite Patches (Favorite Patch)” (p. 44).
Using [F1]–[F8] to Register
1. Press [PATCH/RHYTHM] to access the Patch Play screen,
and select the rhythm set that you wish to register (p. 52).
2. Press [F2 (Favorite)].
3. Turn the VALUE dial or press [INC]/[DEC] to select the
Bank.
4. Hold down [SHIFT] and press [F1]–[F8] to execute the
registration.
The rhythm set will be registered to the button you pressed.
5. When you have finished registering, press [EXIT].
Using the Favorite List Screen to
Register
1. Press [PATCH/RHYTHM] to access the Patch Play screen,
and select the rhythm set that you wish to register (p. 52).
2. Press [F1 (Patch List)].
3. Press [F3 (Favorite)].
The Favorite List screen appears.
fig.05-011_50
4. Press [F1 ( ⇑ )] or [F2 ( ⇓ )] to select the Bank.
5. Press or to select favorite number.
6. Press [F6 (Regist)] to execute the registration.
By pressing [F7 (Preview)] you can audition the sound of the
registered rhythm set (Phrase Preview).
7. When you have finished registering favorite patchs, press
[EXIT] to close the Favorite List screen.
Canceling a patch registration
By pressing [F4 (Remove)] you can cancel the patch registration that
is selected in the Favorite List screen.
The Octave Shift function transposes the pitch of the keyboard in 1
octave units (-3– +3 octaves).
For playing a bass part more easily using your right hand, transpose
the keyboard down by 1 or 2 octaves.
* Octave Shift applies only to the keyboard part.
1. Press [PATCH/RHYTHM] to access the Patch Play screen.
2. Press KEYSHIFT [-OCT] or [+OCT] to set the amount of
transposition (-3–+3).
The button will light if this is set.
* Each time you press [+OCT], the amount of transposition will change
in the order of +1, +2, and +3. Each time you press [-OCT], the
amount of transposition will change in the order of -1, -2, and -3. If
you press both buttons simultaneously, the amount of movement will
be zero.
fig.05-012
There is a single Octave Shift setting (Setup parameter) for the
entire Fantom-X. The changed setting will be remembered even
if you switch patches or performances.
Registering Favorite Rhythm Sets
Transposing the Keyboard
in Octave Units (Octave
Shift)
Fantom-X678_r_e.book 45 ページ ２００５年５月１２日 木曜日 午後４時４０分