Saving rhythm sets you’ve created (write), 86 creating a rhythm set – Roland Fantom-X7 User Manual
Page 86
86
Creating a Rhythm Set
Changes you make to sound settings are temporary, and will be lost
if you turn off the power or select another sound. If you want to keep
the modified sound, you must save it in the internal user memory or
memory card.
When you edit the patch settings, an “*” will appear in the Patch
Play screen.
When you perform the save procedure, the data that previously
occupied the save destination will be lost.
1.
Make sure that the Rhythm Set you wish to save is selected.
2.
Press [WRITE].
The WRITE Menu screen appears.
fig.07-005_50
3.
Press [F2 (Patch/Rhythm)].
*
Press
or
to select “Rhythm Edit,” and then press [ENTER].
The Rhythm Set Name screen appears.
fig.07-006_50
4.
Assign a name to the rhythm set.
For details on assigning names, refer to
5.
When you have finished inputting the name, press [F8
(Write)].
A screen will appear, allowing you to select the write-
destination rhythm set.
6.
Turn the VALUE dial or use [INC][DEC] and [F2 (
⇑
)] [F3 (
⇓
)]
to select the write destination and rhythm set number.
The write destination can be either the Fantom-X’s internal user
area (User), or a memory card (Card).
fig.07-007_50
By pressing [F6 (Compare)] you can check the save-destination
Rhythm set (Compare function).
7.
Press [F8 (Write)].
A message will ask you for confirmation.
Never switch off the Fantom-X while data is being saved.
8.
Press [F8 (Exec)] to execute the save operation. To cancel
the operation, press [F7 (Cancel)].
*
To cancel, press [F7 (Cancel)].
Before you save a rhythm set, you can audition the rhythm set which
currently occupies the save destination to make sure that it is one
you don’t mind overwriting. This can help prevent important
rhythm sets from being accidentally overwritten and lost.
1.
Follow the procedure in “Saving Rhythm Sets You’ve
Created (Write)” through step 5 to select the save
destination.
2.
Press [F7 (Compare)] to light it into red.
The Rhythm Compare window appears, making it possible to
sound the currently selected save destination rhythm set.
fig.07-008.e
3.
Play the keyboard or pad to sound the save destination
rhythm set, then check whether you really want to overwrite
it.
The rhythm set auditioned using the Compare function may
sound slightly different than when it is played normally.
Saving Rhythm Sets You’ve
Created (Write)
Auditioning the Save-Destination
Rhythm Set (Compare)
Save-destination
rhythm set
Fantom-X678_r_e.book 86 ページ ２００５年５月１２日 木曜日 午後４時４０分