Roland Fantom-X7 - Manual (Page 219)

219
Connecting to Your Computer via USB (USB Mode)
By connecting the Fantom-X with your computer via a USB cable,
you can transfer files from Internal user area or a memory card to
and from the hard disk or other media of your computer, in order to
back up your data.
You can use software on your computer to edit wave data you’ve
created on the Fantom-X. Conversely, wave data that you’ve created
on your computer can be used on the Fantom-X.
In this way, USB Storage mode lets you transfer files such as patch
and waves to or from a connected computer.
Connect or disconnect the USB cable only when the Fantom-X is
powered-off. Never connect or disconnect the USB cable or turn
off the power while in USB mode or while data is being
transferred.
1. With the Fantom-X not connected, start up your computer.
2. Use a USB cable to connect the Fantom-X to your
computer.
3. Turn on the power (POWER switch) of the Fantom-X.
When the Fantom-X is connected to your computer, you can select
the area on the Fantom-X to which a connection is to be made; either
the internal user area or the memory card.
1. Press [MENU].
2. Press or to select “USB,” and then press [ENTER].
The USB screen will appear.
* If USB is not set to Storage mode, a warning of “The USB is in MIDI
Mode!!” will appear when you press [ENTER] in step 2. Press [F8
(Exec)] if you want to switch to USB Storage mode (the USB settings
screen will appear). If you decide to cancel, press [F7 (Cancel)].
fig.23-001_50
3. Press [F3 (Internal)] or [F6 (Memory Card)] to connect with
your computer.
[F3 (Internal)]: Connect to the user memory
[F6 (Memory Card)]: Connect to the memory card
* To cancel the connection, press [Exit].
4. The display will differ as follows, depending on the
computer you’re using.
• Windows Me/2000 users
A drive named “Removable disk” will be displayed within My
Computer.
Below that drive there will be folders named “ROLAND” and
“TMP.”
• Macintosh, Windows XP users
A drive icon named “FANX USER” will appear on the desktop.
If a memory card is connected, the volume name of the memory
card will be displayed.
Below it will be folders named “ROLAND” and “TMP.”
Transferring Files to or from
Your Computer (Storage Mode)
Connections
Specify the Connection-Destination
Fantom-X678_r_e.book 219 ページ ２００５年５月１２日 木曜日 午後４時４０分