ABAQUS Volume II: I–Z - Manual (Page 114)

*KAPPA
Subsequent lines (only needed if the DEPENDENCIES parameter has a value greater than five):
1. Sixth field variable.
2. Etc., up to eight field variables per line.
Repeat this set of data lines as often as necessary to define as a function of concentration,
temperature, and other predefined field variables.
Data lines to define the pressure stress factor, k
p
(TYPE=PRESS):
First line:
1. Pressure stress factor, . (Units of LF
−1/2
.)
2. Concentration, c.
3. Temperature, .
4. First field variable.
5. Second field variable.
6. Etc., up to five field variables.
Subsequent lines (only needed if the DEPENDENCIES parameter has a value greater than five):
1. Sixth field variable.
2. Etc., up to eight field variables per line.
Repeat this set of data lines as often as necessary to define as a function of concentration,
temperature, and other predefined field variables.
11.1–2
ABAQUS Version 6.1 Module: ID:
Printed on: