Required parameter – ABAQUS Volume II: I–Z User Manual
Page 123
Advertising
*LOAD CASE
12.2
*LOAD CASE:
Begin a load case definition for multiple load case analysis.
This option is used to begin each load case definition.
Product:
ABAQUS/Standard
Type:
History data
Level:
Step
References:
•
“Multiple load case analysis,” Section 6.1.3 of the ABAQUS Analysis User’s Manual
•
*END LOAD CASE
Required parameter:
NAME
Set this parameter equal to a label that will be used to refer to the load case.
There are no data lines associated with this option.
12.2–1
ABAQUS Version 6.1
Module: ID:
Printed on:
Advertising