ABAQUS Volume II: I–Z - Manual (Page 160)

*MOHR COULOMB
2. Dilation angle, , at high confining pressure in the p– plane. Give the value in degrees.
3. Temperature.
4. First field variable.
5. Second field variable.
6. Etc., up to five field variables.
Subsequent lines (only needed if the DEPENDENCIES parameter has a value greater than five):
1. Sixth field variable.
2. Etc., up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the dependence of the material parameters
on temperature and other predefined field variables.
13.16–2
ABAQUS Version 6.1 Module: ID:
Printed on: