ABAQUS Volume II: I–Z - Manual (Page 39)

*IMPORT NSET
9.7 *IMPORT NSET: Import node set definitions from a previous ABAQUS/Explicit or
ABAQUS/Standard analysis.
This option is used to import node set definitions that were defined in a previous ABAQUS/Explicit or
ABAQUS/Standard analysis. If the *IMPORT NSET option is used, it must appear after the *IMPORT
option. If this option is omitted or is specified without any data lines, all the node sets relevant to the analysis
will be imported.
Products: ABAQUS/Standard ABAQUS/Explicit
Type: Model data
Level: Model
References:
•
“Transferring results between ABAQUS/Explicit and ABAQUS/Standard,” Section 9.2.2 of the
ABAQUS Analysis User’s Manual
•
*IMPORT
There are no parameters associated with this option.
Data lines to specify node set definitions to be imported:
First line:
1. List of node set names for which the node set definitions are to be imported.
Repeat this data line as often as necessary to specify the node set definitions to be imported. Up to 16
node sets can be listed per line.
9.7–1
ABAQUS Version 6.1 Module: ID:
Printed on: