Optional parameter – ABAQUS Volume II: I–Z User Manual
Page 563
Advertising
*TORQUE PRINT
19.8
*TORQUE PRINT:
Print a summary of the total torque that can be transmitted across
axisymmetric slide lines.
This option is used to obtain a summary of the total torque that can be transmitted across all axisymmetric
slide lines in a model.
Product:
ABAQUS/Standard
Type:
History data
Level:
Step
Reference:
•
“Slide line contact elements,” Section 31.4.1 of the ABAQUS Analysis User’s Manual
Optional parameter:
FREQUENCY
Set this parameter equal to the output frequency, in increments. When this option is used, the torque
output will always be printed at the last increment of each step unless FREQUENCY=0. The default
is FREQUENCY=1.
There are no data lines associated with this option.
19.8–1
ABAQUS Version 6.1
Module: ID:
Printed on:
Advertising