ABAQUS Volume II: I–Z - Manual (Page 213)

*NODE RESPONSE
14.12 *NODE RESPONSE: Define nodal responses for design sensitivity analysis.
This option is used to write nodal response sensitivities to the output database. It must be used in conjunction
with the *DESIGN RESPONSE option.
Product: ABAQUS/Design
Type: History data
Level: Step
References:
•
“Design sensitivity analysis,” Section 14.1.1 of the ABAQUS Analysis User’s Manual
•
*DESIGN RESPONSE
Optional parameter:
NSET
Set this parameter equal to the name of the node set for which this sensitivity output is being made.
Data lines to request nodal sensitivity output:
First line:
1. Specify the identifying keys for the responses whose sensitivities are to be written to the output
database. The valid keys are listed in “Design sensitivity analysis,” Section 14.1.1 of the
ABAQUS Analysis User’s Manual.
Repeat this data line as often as necessary to define the nodal responses whose sensitivities are to be
written to the output database.
14.12–1
ABAQUS Version 6.1 Module: ID:
Printed on: