ABAQUS Volume II: I–Z - Manual (Page 450)

*SORPTION
3. . This value must lie in the range . The default is 0.01.
4. . This value must lie in the range . The default is 0.01 plus a very
small positive number (since cannot be equal to ).
Data line for TYPE=SCANNING:
First (and only) line:
1. Slope of the scanning line, . This slope must be positive and larger than the slope
of any segment of the absorption or exsorption behavior definitions.
18.26–2
ABAQUS Version 6.1 Module: ID:
Printed on: