ABAQUS Volume II: I–Z - Manual (Page 260)

*PIEZOELECTRIC
2. .
3. .
4. .
5. .
6. .
7. .
8. .
Third line:
1. .
2. .
3. Temperature, .
4. First field variable.
5. Second field variable.
6. Etc., up to five field variables.
Subsequent lines (only needed if the DEPENDENCIES parameter has a value greater than five):
1. Sixth field variable.
2. Etc., up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the piezoelectric properties as a function of
temperature and other predefined field variables.
Data lines to define the piezoelectric strain coefficient matrix (TYPE=E; for the shear
components these coefficients relate the engineering, and not the tensorial, shear strain
components to the components of the potential gradient vector):
First line:
1. . (Units of L
−1
.)
2. .
3. .
4. .
5. .
6. .
7. .
8. .
Second line:
1. .
2. .
16.8–2
ABAQUS Version 6.1 Module: ID:
Printed on: