ABAQUS Volume II: I–Z User Manual
Page 290
*POROUS ELASTIC
2. Etc., up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the dependence of the material parameters
,
G
, and
on temperature and field variables.
Data lines to define the instantaneous shear modulus from the bulk modulus and Poisson’s ratio:
First line:
1. Value of the logarithmic bulk modulus, . (Dimensionless.)
2. Value of Poisson’s ratio, .
3. Value of the elastic tensile limit,
. (This value cannot be negative.)
4. Temperature, .
5. First field variable.
6. Etc., up to four field variables.
Subsequent lines (only needed if the DEPENDENCIES parameter has a value greater than four):
1. Fifth field variable.
2. Etc., up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the dependence of the material parameters
, , and
on temperature and field variables.
16.18–2
ABAQUS Version 6.1
Module: ID:
Printed on: