ABAQUS Volume II: I–Z - Manual (Page 521)

*SURFACE INTERACTION
Second line (needed only if the PROPERTIES parameter is used):
1. Enter the values of the surface interaction properties, eight per line.
Repeat this data line as often as necessary to define all material constants.
Data lines to define the surface interaction in an ABAQUS/Explicit analysis if the PROPERTIES
parameter is used:
First line:
1. Enter a blank line.
Second line:
1. Enter the values of the surface interaction properties, eight per line.
Repeat this data line as often as necessary to define all material constants.
18.49–3
ABAQUS Version 6.1 Module: ID:
Printed on: