ABAQUS Volume II: I–Z - Manual (Page 199)

*NO COMPRESSION
14.5 *NO COMPRESSION: Introduce a compressive failure theory (tension only
materials).
This option is used to modify the elasticity definition so that no compressive stress is allowed. It can be used
only in conjunction with the *ELASTIC option.
Product: ABAQUS/Standard
Type: Model data
Level: Model
References:
•
“No compression or no tension,” Section 17.2.2 of the ABAQUS Analysis User’s Manual
•
*ELASTIC
There are no parameters or data lines associated with this option.
14.5–1
ABAQUS Version 6.1 Module: ID:
Printed on: