ABAQUS Volume II: I–Z - Manual (Page 402)

*SELECT EIGENMODES
Data lines if the GENERATE parameter is omitted and DEFINITION=MODE NUMBERS:
First line:
1. List of modes to be used.
Repeat this data line as often as necessary. Up to 16 entries are allowed per line.
Data lines if the GENERATE parameter is omitted and DEFINITION=FREQUENCY RANGE:
First line:
1. Lower boundary of the frequency range (in cycles/time).
2. Upper boundary of the frequency range (in cycles/time).
Repeat this data line as often as necessary.
Data lines if the GENERATE parameter is included:
First line:
1. First mode number.
2. Last mode number.
3. Increment in mode numbers between modes. The default is 1.
Repeat this data line as often as necessary.
18.7–2
ABAQUS Version 6.1 Module: ID:
Printed on: