ABAQUS Volume II: I–Z - Manual (Page 321)

*RADIATION OUTPUT
17.3 *RADIATION OUTPUT: Define output database requests for cavity radiation
variables.
This option is used to write cavity radiation variables to the output database. It must be used in conjunction
with the *OUTPUT option.
Product: ABAQUS/Standard
Type: History data
Level: Step
References:
•
“Output to the output database,” Section 4.1.3 of the ABAQUS Analysis User’s Manual
•
*OUTPUT
Optional, mutually exclusive parameters (if not specified, output will be provided for all cavities
in the model):
CAVITY
Set this parameter equal to the name of the cavity for which this output request is being made.
ELSET
Set this parameter equal to the name of the element set for which this output request is being made.
SURFACE
Set this parameter equal to the name of the surface for which this output request is being made.
Optional parameter:
VARIABLE
Set VARIABLE=ALL to indicate that all cavity radiation variables applicable to this procedure and
material type should be written to the output database.
If this parameter is omitted, the cavity radiation variables requested for output must be specified
on the data lines.
17.3–1
ABAQUS Version 6.1 Module: ID:
Printed on: