GE Industrial Solutions 6KCV300DVN - Manual (Page 34)

GEI-100431
—————— POLLING FUNCTION ——————
4 34
DATA TYPE FIELD VALUE MEANING
Byte Service Code 10hex
Set_Attribute_Single -
Common Service.
Class ID 68hex
Polling S ->M Configuration
Class Object
Instance ID 01 Polling S ->M Instance ID
Byte VALUE XX
Polling S ->M word involved
in the configuration
Word
Word XX Polling
S->M
XXXX 2)
Drive parameter index
assigned to the Polling
S ->M XX word
dn4030
See Note 1)
1) Byte or Word depending on the type of allocation executed by the Master.
2) The format of the Drive parameter index is Low Byte – High Byte.
4.1.6.1.2 Write Single Polling S->M configuration - Reply OK
If the single configuration of the Polling S->M is written correctly, the response
is composed as follows:
DATA TYPE FIELD VALUE MEANING
Service
Code
10hex OR
80hex
Set_Single - Attribute Reply
code - Common Service.
General
Error
00
Additional 00
dn4040
Byte
Zero means service correctly
executed
4.1.6.1.3 Write Single Polling S->M Configuration - Reply Error
If the writing of the single configuration Polling S->M is rejected, the response
is the following:
DATA TYPE FIELD VALUE MEANING
Service
Code
14hex OR
80hex
Set _Attribute_Single Reply
code- Common Service.
1Fhex
Error vendor specific (see
Additional field)
<> 1Fhex
DeviceNet specific error
code (see DeviceNet
Specifications).
Additional XX 1) Drive specific error code.
dn4050
Byte General
Error
1) For error codes see chapter 6.0.