GE Industrial Solutions 6KCV300DVN - Manual (Page 75)

6KCV300DVN
7
75
———— KEYBOARD INTERFACE ———
19 Maximum number of allocatable group 3 identifiers already allocated
20 Group specified in open messaging connection is invalid
21 Invalid service code received in received ucmm request message
22 Duplicate MacId check response has been received
23 Duplicate MacId check request has been received
24 Cannot send open cnxn-based request since a request is outstanding
25 A connection within the client is not available
26 Timer Id not correct
27 expected_packet_rate not supported (is greater than maximum
allowed)
28 No more Timer available
29 watchdog_timeout_action not correct
30 Watchdog time-out occured
31 UCMM time-out occured
32 Explicit time-out occured
33 Attempt to deallocate a CAN channel not allocated
34 No more CAN channel available
35 No more CAN channel available for transmission
36 CAN Interrupt register error
37 CAN is still in hardware reset
38 CAN status register error
39 Error on allocation
40 BusOff detected
41 Error on the-allocation
42 Too much data
43 Parameter object data type not correct
44 Connection path not correct
45 I/O length not correct
DnetStUser Meaning
Code
0 No error exists
1 No resource available
2 Duplicate MacId Check error
3 Illegal transmission
4 Illegal reception
5 Illegal action
6 Time-out error
7 Parameter error
8 DeviceNet is not enabled
9 DeviceNet module is not present or not ok
10 Hardware problem
0FFFFH General error