GE Industrial Solutions 6KCV300DVN - Manual (Page 51)

6KCV300DVN
5 51
———— SETTING VIRTUAL DIGITAL I/Os ————
5.1.6.1.6 Write Entire Virtual Digital Input configuration - Reply Error
If the writing of the entire configuration of the “Virtual Digital Inputs” is
rejected, the response is the following:
DATA TYPE FIELD VALUE MEANING
Service
Code
14hex OR
80hex
Set _Attribute_Single Reply
code- Common Service.
1Fhex
Error vendor specific (see
Additional field)
<> 1Fhex
DeviceNet specific error
code (see DeviceNet
Specifications).
Additional XX 1) Drive specific error code.
dn4050
Byte General
Error
1) For error codes see chapter 6.0.
5.1.6.2 Read Virtual Digital Input configuration
In this example is shown the reading of the configuration of the “Virtual Digital
Inputs”; the cases of positive and wrong reading are distinguished.
5.1.6.2.1 Read Single Virtual Digital Input configuration
The data frame for the reading of the single configuration of the “Virtual Digital
Inputs” is composed as follows:
DATA TYPE FIELD VALUE MEANING
Byte Service Code 0Ehex
Get_Attribute_Single - Common
Service.
Class ID 6Ahex
Virtual Digital I/O
Configuration Class Object
Instance ID 01
Virtual Digital Input Instance
ID
Byte Attribute ID XX
Virtual Digital Input XX word
involved in the configuration
dn5050
See Note 1)
1) Byte or Word depending on the type of allocation executed by the Master.
5.1.6.2.2 Read Single Virtual Digital Input configuration - Reply OK
If the single configuration of the “Virtual Digital Inputs” is read correctly, the
response is composed as follows: