GE Industrial Solutions 6KCV300DVN - Manual (Page 57)

6KCV300DVN
5 57
———— SETTING VIRTUAL DIGITAL I/Os ————
5.2.6.1.4 Write Entire Virtual Digital Output configuration
The data frame for the writing of the entire configuration of the “Virtual Digital
Outputs” is composed as follows:
DATA TYPE FIELD VALUE MEANING
Byte Service Code 02hex Set_Attribute_All -Common Service
Class ID 6Bhex
Virtual Digital Output Configuration
Class Object
Instance ID 01 Virtual Digital Output Instance ID
Virtual Digital
Output Word 0
Drive parameter index assigned to the
Virtual Digital Output first word.
Virtual Digital
Output Word xx
Drive parameter index assigned to the
Virtual Digital Output xx th word.
Virtual Digital
Output Word 15
Drive parameter index assigned to the
Virtual Digital Output 16th word.
dn5130
See Note 1)
Word XXXX 2)
1) Byte or Words depending on the type of allocation executed by the Master.
2) The format of the Drive parameter index is Low Byte - High byte.
5.2.6.1.5 Write Entire Virtual Digital Output configuration - Reply OK
If the entire configuration of the “Virtual Digital Outputs” is written correctly,
the response is composed as follows:
DATA TYPE FIELD VALUE MEANING
Service
Code
02hex OR
80hex
Set_Attribute_All Reply
code- Common Service.
General
Error
00
Additional 00
dn4070
Byte
Zero means service correctly
executed.
5.2.6.1.6 Write Entire Virtual Digital Output configuration - Reply Error
If the writing of the entire configuration of the “Virtual Digital Outputs” is
rejected, the response is the following:
DATA TYPE FIELD VALUE MEANING
Service
Code
14hex OR
80hex
Set _Attribute_Single Reply
code- Common Service.
1Fhex
Error vendor specific (see
Additional field)
<> 1Fhex
DeviceNet specific error
code (see DeviceNet
Specifications).
Additional XX 1) Drive specific error code.
dn4050
Byte General
Error
1) For error codes see chapter 6.0.