GE Industrial Solutions 6KCV300DVN - Manual (Page 44)

GEI-100431
—————— POLLING FUNCTION ——————
4 44
4.2.6.2.3 Read Single Polling M->S configuration - Reply Error
If the reading of the single configuration of the Polling M->S is rejected, the
response is the following:
DATA TYPE FIELD VALUE MEANING
Service
Code
14hex OR
80hex
Get _Attribute_Single Reply
code- Common Service.
1Fhex
Error vendor specific (see
Additional field)
<> 1Fhex
DeviceNet specific error
code (see DeviceNet
Specifications).
Additional XX 1) Drive specific error code.
dn4105
Byte General
Error
1) For error codes see chapter 6.0.
4.2.6.2.4 Read Entire Polling M->S configuration
The data frame for the reading of the total configuration of the Polling M->S is
composed as follows:
DATA TYPE FIELD VALUE MEANING
Byte Service Code 01hex
Get_Attribute_All -Common
Service.
Class ID 69hex
Polling M->S Configuration
Class Object.
Instance ID 01 Polling M->S Instance ID.
dn4210
See Note 1)
1) Byte or Word depending on the type of allocation executed by the Master.
4.2.6.2.5 Read Entire Polling M->S configuration - Reply OK
If the entire configuration of the Polling M->S is read correctly, the response is
composed as follows:
DATA TYPE FIELD VALUE MEANING
Byte Service Code
01hex OR
80hex
Get_Attribute_All -Common
Service.
Word 0 Polling
M->S
Drive parameter index assigned
to the Polling M->S first word.
Word xx
Polling M->S
Drive parameter index assigned
to the Polling M->S xx th word.
Word 4 Polling
M->S
Drive parameter index assigned
to the Polling M->S 4th word.
dn4220
Word XXXX 1)
1) The format of the Drive parameter index is Low Byte - High byte.