GE Industrial Solutions 6KCV300DVN - Manual (Page 79)

6KCV300DVN
7
79
———— KEYBOARD INTERFACE ———
7.8 EDIT
The Editing phase is activated by pressing the Enter key when positioned on
an item that can be set; during this phase, the functions of the keys are as
follows:
1) The Right/Left Cursor keys are used to move along the number being
specified; the number of permitted digits depends on the type of data item
being operated on.
2) The “+” and “-” keys are used to increment/decrement the value of the
selected digit; permitted values are in the range 0 to 9.
3) Enter key confirms the setting.
4) Cancel key cancels the setting operation.
During Editing, the digit being set will flash.
ENT
Par. index Offset
0
Enter Offset
0 0 0 0
+
-
CANC
ENT ok
Return without changes
0 ... 9
9 ... 0
SBI DeviceNet
OFFSET
ENT
CANC
The above figure shows an example of editing a value and the effect of keys
during this phase.