GE Industrial Solutions 6KCV300DVN - Manual (Page 69)

6KCV300DVN
7
69
———— KEYBOARD INTERFACE ———
7.6 PASSWORD MENU
Password setup is handled by a Menu with the following structure:
PASSWORD
Enter New Passw.
XXXXX
TSB8070
Pressing the Cancel key returns to the immediately superior Menu level. Pressing
the Enter key enters the Password Edit mode.
The Password is requested when a protected Menu or menu item has being
accessed.
This request is also dependent on the current Password Status. In consequence,
four possible cases can be identified:
a) Password enabled: this means that a password has been set up via the
corresponding Menu; a zero (0) value (default) disables the Password.
b) Password active: if the Password is enabled, it becomes active as soon as
the 6KCV300DVN card’s Main Menu is displayed. It is deactivated by
correctly entering its value when first setting a parameter that is protected
by it. The Password is automatically reactivated upon leaving the
6KCV300DVN card Main Menu.
c) Password disabled: value is zero (default condition).
d) Password inactive: the Password has already been requested and correctly
entered.
The Password is an unsigned integer number and therefore has a maximum of
five digits; if a shorter number is entered, the remaining digits are assumed
zeroes.
7.6.1 Password request
The Password is requested when it is enabled and active and it is attempted to
access a protected Menu or menu item. In this situation, the following message
is displayed:
Enter Password: TSB8080
The Password is entered in Edit mode (see chapter 7.8), with the Password’s
digits being shown.
There is also a universal password with a value of 78622.