GE Industrial Solutions 6KCV300DVN - Manual (Page 64)

GEI-100431
———— KEYBOARD INTERFACE ———
7 64
7.2 OFFSET MENU
The Offset menu structure is the following:
OFFSET
Par.index Offset
XXXXX
DNM0020
It shows the Offset to be added to the parameter index entered with the following
menus:
- POLL S->M.
- POLL M->S.
- Digital Input.
- Digital Output.
The Offset value consists of five digits.
Pressing the Enter key will result in the “Enter Offset” message being displayed
on the first row; the value is entered on the second row.
7.2.1 Edit offset
The flowchart illustrating Offset Editing is shown below. Note that pressing
Cancel at any time returns to the previous Menu or cancels the operation in
course. Refer to chapter 7.8 for Editing..
Enter pressed
Password enabled
or active ?
Enter password
Password OK ?
Enter Offset
Exit
Warning Exit
no
no
yes
yes