GE Industrial Solutions 6KCV300DVN - Manual (Page 74)

GEI-100431
———— KEYBOARD INTERFACE ———
7 74
7.7.3.1 DeviceNet error types
DNetStatus Meaning
Code
0 No error exists
1 Resource not available
2 Value out of range
3 transportClass_trigger invalid
4 Invalid service for object state
5 Illegal message format
6 Invalid condition for transmission
7 Outstanding request exists
8 Object does not exist
9 Service not supported
10 Duplicate MacId check response received
11 Duplicate MacId check request received
12 Object not available
13 OpenAllIOCnxn failed
14 Duplicate MacId error
15 Time-out error
16 Software error
17 Message error
18 Hardware error
DnetStAux Meaning
Code
0 No additional information
1 All available group 2 message identifiers have been allocated
2 Invalid Ainitial_comm_characteristic@ attribute
3 All available group 1 message identifiers have been allocated
4 All available group 3 message identifiers have been allocated
5 Invalid value within the AtransportClass_trigger@ attribute
6 An Apply request is sent to a Connection instance when it is in
the Established or Timed-out state
7 Illegal to send fragmented explicit Connection message
8 Connection object must be in Established state and must beMessaging
type of Connection in order to send a cnxn-based request
9 Cannot send cnxn-based request since a request is outstanding
10 Invalid instance identifier specified in received explicit message
request
11 Explicit message request is directed at non-existent cnxn instance
12 A Create request can only be sent to the class, not a particular
instance
13 ConfigCnxnndex already set
14 Unable to create cnxn class
15 Apply_attribute cannot be sent to the cnxn class, only a specific
instance
16 Invalid service code received in explicit message request
17 Class specified in received Cnxn Based Explicit request message
does not exist
18 More than 2 group 2 object have been created