GE Industrial Solutions 6KCV300DVN - Manual (Page 65)

6KCV300DVN
7
65
———— KEYBOARD INTERFACE ———
The Default Offset value is 0 (zero). The entered value is not stored in non-
volatile memory and therefore only remains active until such time as power is
removed; the Offset is however maintained active when the 6KCV300DVN
main menu is exited.
Refer to section 7.6.1. for messages regarding Password entry.
7.3 POLLING MENU
The structure of the POLL Menus is the following:
POLL S->M POLL M->S
POLL SM CHAN 0 POLL MS CHAN 0
Index: XXXXX Index: XXXXX
POLL SM CHAN 1 POLL MS CHAN 1
Index: XXXXX Index: XXXXX
POLL SM CHAN 2 POLL MS CHAN 2
Index: XXXXX Index: XXXXX
POLL SM CHAN 3 POLL MS CHAN 3
Index: XXXXX Index: XXXXX
DNM0030
They show the indexes (with or without Offset, see par. 7.2) of the Drive
parameters assigned to the Polling I/O function.
By pressing the keys Cursor-Up/Cursor-Down it is possible to move inside the
channel Menus; the key Cancel allows to go back to the upper level Menus. By
pressing the key Enter you enter the Edit condition of the Polling I/O function.
The indexes of the Drive parameters are displayed an 5 digit format.
The parameter index is not automatically updated: it means that if a new
assignment is carried out by a Master while the index displaying is active, the
new values are not automatically displayed but it is necessary to exit and enter
the Polling I/O Menu again.
7.3.1 Edit for drive parameter assignment to the Polling I/O function
The flowchart illustrating Editing of Drive parameter assignments to the Polling
I/O functions is shown below. Note that pressing Cancel at any time returns to
the previous Menu or cancels the operation in course. Refer to chapter 7.8 for
Editing.