GE Industrial Solutions 6KCV300DVN - Manual (Page 55)

6KCV300DVN
5 55
———— SETTING VIRTUAL DIGITAL I/Os ————
5.2.4 Common services
Class Instance
01
hex
Get_Attribute_All
Reads the indexes of the drive
parameter assigned to the
Virtual Digital Output
02
hex
Set_Attribute_All
Writes the indexes of the
drive parameter assigned to
the Virtual Digital Output
0E
hex
Get_Attribute_Single
Reads a single index of the
drive parameter assigned to
the Virtual Digital Output
10
hex
Set_Attribute_Single
Writes a single index of the
drive parameter assigned to
the Virtual Digital Output
dn5110
Service Name Description of Service
n/a Required
Service
Code
Need in
implementation
5.2.5 Object specific services
This object has no specific services.
5.2.6 Behavior
This object allows to assign Drive parameters to the “Virtual Digital Outputs”
so that the Master can read cyclically the parameter values. The assignment of
the Drive parameters is accomplished through the index of the parameter; if
the parameter for any reason cannot be assigned to a “Virtual Digital Output”,
an error code will be returned.
5.2.6.1 Write Virtual Digital Output configuration
In this example the writing of the configuration of the “Virtual Digital Outputs”
is shown; the cases of positive and wrong writing are distinguished.