GE Industrial Solutions 6KCV300DVN - Manual (Page 50)

GEI-100431
———— SETTING VIRTUAL DIGITAL I/Os ————
5 50
5.1.6.1.3 Write Single Virtual Digital Input configuration - Reply Error
If the writing of the single configurations of the “Virtual Digital Inputs” is
rejected, the response is the following:
DATA TYPE FIELD VALUE MEANING
Service
Code
14hex OR
80hex
Set _Attribute_Single Reply
code- Common Service.
1Fhex
Error vendor specific (see
Additional field)
<> 1Fhex
DeviceNet specific error
code (see DeviceNet
Specifications).
Additional XX 1) Drive specific error code.
dn4050
Byte General
Error
1) For error codes see chapter 6.0.
5.1.6.1.4 Write Entire Virtual Digital Input configuration
The data frame for the writing of the entire configuration of the “Virtual Digital
Inputs” is composed as follows:
DATA TYPE FIELD VALUE MEANING
Byte Service Code 02hex Set_Attribute_All -Common Service
Class ID 6Ahex
Virtual Digital Input Configuration
Class Object
Instance ID 01 Virtual Digital Input Instance ID
Virtual Digital
Input Word 0
XXXX 2)
Drive parameter index assigned to
the Virtual Digital Input first word.
Virtual Digital
Input Word xx
XXXX
Drive parameter index assigned to
the Virtual Digital Input xx th word.
Virtual Digital
Input Word 15
XXXX 2)
Drive parameter index assigned to
the Virtual Digital Input 16th word.
dn5040
See Note 1)
Word
1) Byte or Word depending on the type of allocation executed by the Master.
2) The format of the Drive parameter index is Low Byte - High byte.
5.1.6.1.5 Write Entire Virtual Digital Input configuration - Reply OK
If the entire configuration of the “Virtual Digital Inputs” is written correctly,
the response is composed as follows:
DATA TYPE FIELD VALUE MEANING
Service
Code
02hex OR
80hex
Set_Attribute_All Reply
code- Common Service.
General
Error
00
Additional 00
dn4070
Byte
Zero means service correctly
executed.