GE Industrial Solutions 6KCV300DVN - Manual (Page 67)

6KCV300DVN
7
67
———— KEYBOARD INTERFACE ———
The parameter index is equal to the drive parameter number plus 8192. To add
the virtual digital I/O parameters to the DeviceNet polling I/O, use the following
parameter index numbers:
Virtual Digital Input Parameter Index 24318
Virtual Digital Output Parameter Index 24139.
7.4 VIRTUAL DIGITAL I/O MENU
The Virtual Digital I/O Menu ( Input and Output) has the following structure:
DIGITAL INPUT DIGITAL OUTPUT
DGT IN CHAN 0 DGT OUT CHAN 0
Index: XXXX Index: XXXX
DGT IN CHAN 1 DGT OUT CHAN 1
Index: XXXX Index: XXXX
DGT IN CHAN 2 DGT OUT CHAN 2
Index: XXXX Index: XXXX
DGT IN CHAN 3 DGT OUT CHAN 3
Index: XXXX Index: XXXX
TSB8060
The indices (with or without Offset - see chapter 7.2) for the Drive parameters
assigned to the Virtual Digital Input/Output Channels are displayed.
Move between the Channel Menus by pressing the Cursor-Up/Cursor-Down
keys. The Cancel key is used to return to the immediately superior Menu level.
Pressing the Enter key enters the Virtual Digital I/O Edit mode.
Drive parameter indices are displayed as 5-digit integers.
The parameter index is not automatically refreshed. In other words, if a new
assignment is performed by a Master while the index is currently on display,
the new value will not automatically be shown - it is necessary to exit and re-
enter the Digital I/O Menu.