GE Industrial Solutions 6KCV300DVN - Manual (Page 39)

6KCV300DVN
4 39
—————— POLLING FUNCTION ——————
4.2 OBJECT CONFIGURATION POLLING PARAMETERS M->S
For assigning the Drive parameters to the 4 Words of Polling from Master to
Slave, the new object “POLL M->S CFG” with identificator of a specific class
is used.
The object is composed as follows: Class ID: 69h.
Class Attribute: Revision
Instance Attribute:
· ID = 1: Drive parameter assigned to the first Word of Polling M->S.
· ID = 2: Drive parameter assigned to the second Word of Polling M->S.
· ID = 3: Drive parameter assigned to the third Word of PollingM->S.
· ID = 4: Drive parameter assigned to the fourth Word of Polling M->S.
4.2.1 Class code
Class Code: 69hex
4.2.2 Class attributes
Number
Need in
implementation
Access Rule Name DeviceNet
Data Type
Description
of Attribute
Semantics of
values
1 Optional Get Revision UINT
Revision of
this object
dn345
4.2.3 Instance attributes
Number
Need in
implementation
Access Rule Name DeviceNet
Data Type
1
2
3
4
dn4150
Drive parameter assigned to
the fourth Word of polling
M->S
Description of Attribute
Drive parameter assigned to
the first Word of polling
M->S
Drive parameter assigned to
the second Word of polling
M->S
Drive parameter assigned to
the third Word of polling
M->S
Required Set
M->S
Poll
Conf.
UINT