GE Industrial Solutions 6KCV300DVN - Manual (Page 47)

6KCV300DVN
5 47
———— SETTING VIRTUAL DIGITAL I/Os ————
5.0 SETTING OF VIRTUAL DIGITAL I/O
The configuration of the Virtual Digital I/Os, may be set by keypad and stored
on E2PROM of the 6KCV300DVN board.
For the configuration of the “Virtual Digital I/Os” two new communication
objects are defined.
The setting is allowed in every status of communication and is protected by
password.
Remember that in this chapter the virtual digital inputs/outputs refer to the
Drive, it means that the Master can “write” the virtual digital inputs and
“read” the virtual digital outputs.
Default value: all at zero.
5.1 OBJECT CONFIGURATION VIRTUAL DIGITAL INPUTS
For the assignment of the Drive parameters to the 16 Words of the Virtual
Digital Inputs is used a new object with a specific class identifier.
The object is composed as follows: Class ID: 6Ah.
Class Attribute: Revision
Instance Attribute:
· ID = 1: Word for configuration first Input (direction Master ->Slave).
· ID = 2: Word for configuration second Input (direction Master->Slave).
· ID = x: Word for configuration Inputs (direction Master->Slave).
· ID = 16; Word for configuration sixteenth Input (direction Master->Sla-
ve).
5.1.1 Class code
Class Code: 6Ahex