Teledyne LeCroy WavePro Automation Command - Manual (Page 115)

Automation Command and Query Reference Manual - Control Reference
PreviewPrintColors Action
Show the instrument display in the current color scheme selected for printing.
Description
' Visual Basic Script
Set app = CreateObject("LeCroy.XStreamDSO")
' Show the current color scheme selected for printing.
app.Display.PreviewPrintColors
Example
ResetAll Action
Turns off persistence on any traces where it has been set on.
Description
' Visual Basic Script
Set app = CreateObject("LeCroy.XStreamDSO")
' Reset all persistence traces to non-persisted mode.
app.Display.ResetAll
Example
SegmentMode Enum
Sets/Queries the display mode for segmented input channels. All visible channels are set to the same
display mode by a single command.
Description
' Visual Basic Script
Set app = CreateObject("LeCroy.XStreamDSO")
' Set the display mode for segments in C2 to perspective.
app.Acquisition.C2.SegmentMode = "Perspective"
Example
Values
Adjacent All segments displayed end-to-end, left to right
Mosaic Segments displayed in a mosaic, top-left to bottom right
Overlay Segments are overlaid, similar to persistence
Perspective Segments are displayed in a perspecfive view
Waterfall Successive segments are displayed with increasing vertical offset
TraceIntensity Double
From 1 to 100 step 1 Range
Control the intensity of traces.
Description
1-101
918501 RevA