Teledyne LeCroy WavePro Automation Command - Manual (Page 612)

Automation Command and Query Reference Manual - Processor Reference
HorValue Double
From -1.79769e+308 to 1.79769e+308 step 0 Range
if the "TimeFromCvar" is set to true, this specifies the horizontal (x) coordinate at which the waveform
data "level" or value is to be evaluated
Description
PinToData Bool
If set to true, the vertical values are restricted to actual data points, else if false the values can be
interpolated (linearly) between points.
Description
TimeFromCvar Bool
If true, the horizontal coordinate (typically time) is specified by the "HorValue" cvar, otherwise the time
is specified by the input pin.
Description
LMODE
app.Measure.Px.Operator (ParamEngine = "Lmode")
LevelForPeriodRelative Double
From 0 to 100 step 1 Range
LevelForPeriodType Enum
Values
Absolute
Percent
MultiValued Bool
Set/Query the state of the Multi-Valued enable flag. Enables the emission of 'per-pulse' amplitude
parameters.
Description
LevelForPeriodRelative Double
LevelForPeriodType Enum
MultiValued Bool
LOCALBASE
app.Measure.Px.Operator (ParamEngine = "LocalBase")
Hysteresis Double
2-113
918501 RevA