Teledyne LeCroy WavePro Automation Command - Manual (Page 41)

Automation Command and Query Reference Manual - Control Reference
MaxSamples DoubleLockstep
From 500 to 1.28e+008 step 1000, locked to 1 2.5 5, fine grain allowed=false, on=false Range
Sets/Queries the maximum permissible number of samples to be used in the acquisition memories.
At the faster sample rates, the actual number used may be less than this maximum.
Description
' Visual Basic Script
Set app = CreateObject("LeCroy.XStreamDSO")
' Set the available memory length per channel to 500
app.Acquisition.Horizontal.MaxSamples = 500
Example
NumSegments Integer
From 2 to 15000 step 1 Range
Sets/Queries the number of segments in the sequence mode of acquisition. Only valid when
SampleMode = "Sequence'
Description
' Visual Basic Script
Set app = CreateObject("LeCroy.XStreamDSO")
' Enable sequence mode and capture 500 segments
app.Acquisition.Horizontal.SampleMode = "Sequence"
app.Acquisition.Horizontal.NumSegments = 500
Example
ReferenceClock Enum
Sets/Queries the source of the acquisition reference clock.
Description
' Visual Basic Script
Set app = CreateObject("LeCroy.XStreamDSO")
' Set the source of the reference clock to External.
app.Acquisition.Horizontal.ReferenceClock = "EXT"
Example
Values
External External reference (use rear-panel BNC)
Internal Internal reference clock
1-27
918501 RevA