Teledyne LeCroy WavePro Automation Command - Manual (Page 208)

Automation Command and Query Reference Manual - Control Reference
Clear4 Action
Clear all calibration coefficients for Channel 4.
Description
CommonMode Double
From -1.1 to 1.1 step 0.001 Range
The TF-DSQ fixture will calibrate probes differentially or in single-ended mode depending on the type
of probe. Differential probes allow the common mode voltage component to be applied during the DC
calibration for improved calibration accuracy in situations where probe gain or offset correction
depends on common mode components.
Description
DcCal1 Action
Initiate a DC calibration (Gain/Offset) of Channel 1.
(Note that this action pops up an interactive wizard, which requires a user to manually dismiss)
Description
DcCal2 Action
Initiate a DC calibration (Gain/Offset) of Channel 2.
(Note that this action pops up an interactive wizard, which requires a user to manually dismiss)
Description
DcCal3 Action
Initiate a DC calibration (Gain/Offset) of Channel 3.
(Note that this action pops up an interactive wizard, which requires a user to manually dismiss)
Description
DcCal4 Action
Initiate a DC calibration (Gain/Offset) of Channel 4.
(Note that this action pops up an interactive wizard, which requires a user to manually dismiss)
Description
Deskew1 Action
Initiate a deskew calibration of Channel 1.
(Note that this action pops up an interactive wizard, which requires a user to manually dismiss)
Description
Deskew2 Action
Initiate a deskew calibration of Channel 2.
(Note that this action pops up an interactive wizard, which requires a user to manually dismiss)
Description
Deskew3 Action
Initiate a deskew calibration of Channel 3.
(Note that this action pops up an interactive wizard, which requires a user to manually dismiss)
Description
1-194
918501 RevA