Teledyne LeCroy WavePro Automation Command - Manual (Page 445)

Automation Command and Query Reference Manual - Control Reference
BitRate Double
From 1000 to 1e+010 step 0.0001 Range
The Bitrate of the data stream to be decoded
Description
ColumnState String
Any number of characters Range
This variable lists the visibility state of the columns in the decoded table
Each column is named, followed by an equal sign and the state on or off.
On turns on the column, off turns it off.
Description
The following command would show 3 columns
Time=on|Data=on|DataLength=on
whereas this comand would only show Time and DataLength
Time=on|Data=on|DataLength=off
Example
FilteredSymbolList String
Any number of characters Range
LevelPercent Double
From 0 to 100 step 0.1 Range
The threshold between zeros and ones expressed in Percent of the distance between top and base.
Description
LevelType Enum
The selection between absolute and relative threshold mode
Description
Values
Absolute
Percent
PrimitiveFile FileName
Any number of characters Range
LevelType Enum
PrimitiveFile FileName
PrimitiveSource Enum
ViewingMode Enum
1-431
918501 RevA