Teledyne LeCroy WavePro Automation Command - Manual (Page 213)

Automation Command and Query Reference Manual - Control Reference
Controls for Saving and Recalling instrument setups.
' Visual Basic Script
Set app = CreateObject("LeCroy.XStreamDSO")
' Reset to default setup
app.SaveRecall.Setup.DoRecallDefaultPanel
' Store the current setup into the first of the 6 setup stores.
app.SaveRecall.Setup.InternalName1 = "My Setup1"
Example
DoRecallDefaultNvlPanel Action
Recalls the factory set NVL (preference) panel settings. These are controls which are not affected
when the default panel is recalled, and includes items such as the color preferences, remote control
preferences, etc. Use with care!, especially when invoking via the VBS? Remote command via GPIB
or TCP/IP, which could result in the controller being disconnected when the default port is selected.
Description
' Visual Basic Script
Set app = CreateObject("LeCroy.XStreamDSO")
' Recall the factory default nvl panel settings.
app.SaveRecall.Setup.DoRecallDefaultNvlPanel
Example
DoRecallDefaultNvlPanel Action
DoRecallDefaultPanel Action
DoRecallPanel Action
DoSavePanel Action
InternalName1 String
InternalName2 String
InternalName3 String
InternalName4 String
InternalName5 String
InternalName6 String
PanelDir FileName
PanelFilename FileName
RecallInternal1 Action
RecallInternal2 Action
RecallInternal3 Action
RecallInternal4 Action
RecallInternal5 Action
RecallInternal6 Action
SaveInternal1 Action
SaveInternal2 Action
SaveInternal3 Action
SaveInternal4 Action
SaveInternal5 Action
SaveInternal6 Action
1-199
918501 RevA