Teledyne LeCroy WavePro Automation Command - Manual (Page 196)

Automation Command and Query Reference Manual - Control Reference
PredefinedConditions Enum
Sets/Queries the logical criteria that must be met in a pass-fail test. For example, the condition
AnyTrue means that the pass-fail criterion is met if at least one of the test conditions results in a True
result.
Description
Values
AllFalse
AllQ1ToQ4OrAllQ5ToQ8
AllTrue
AnyFalse
AnyQ1ToQ4AndAnyQ5T
AnyTrue
PrintScreen Bool
Sets/Queries whether Print Screen is included in the PassFail actions.
Description
Pulse Bool
Sets/Queries whether Pulse is included in the PassFail actions. This action emits a pulse from the Aux
output socket.
Description
Save Bool
Sets/Queries whether Save is included in the PassFail actions.
Description
Stop Bool
Sets/Queries whether Stop is included in the PassFail actions.
Description
StopAfter Integer
From 1 to 1000000000 step 1 Range
Sets/Queries the maximum number of sweeps that will be acquired before testing is halted.
Description
StopTesting Bool
If Enabled, testing will stop after a number of sweeps defined by the StopAfter control.
Description
SummaryView Bool
Summary view
Description
1-182
918501 RevA